Toyota's race cars back when Toyota made them.

Celica GT-Four

MR2 Turbo

Supra Turbo

Hey look at that, they all have turbos.

Awesome Automotive Themed Rings.

Dynosty's awesome gauge for the SW20, replaces factory clock.

The final production version will be 4 digit gauge displaying in red. That will allow for a CLOCK!! and 7 other displays for:

- E85 content
- Boost pressure
- Water temp
- Oil pressure
- Air fuel
- Air temp
- Voltmeter

VIDEO DEMO

For the switching between displays, there will be a remote wire (that can be used for a remote push button switch), and there will be an on-board switch, which will work with the left clock button.

The board will have a couple very small connectors on it, and we'll provide the mating plugs with 12" pigtails on it. One of the connectors will be 6-pin for 12V, Gnd, Lights, 5V Out (for sensors that require it), Remote Switch and one reserved for future use. Another connector will be multi-pin for the sensor inputs.

For installation you will remove your clock assembly and take the factory board out and replace it with our new board. You then can drill a tiny hole in the back cover of the clock assembly to feed the wires through.

Sensor Pricing:

(no support for any sensor not supplied by Dynosty)

E85 Flex Fuel Sensor $199
Boost Pressure $39
1/8 NPT Water Temp $18
1/8 NPT Oil Pressure $29
Air Fuel (calibrated 0-5v = 10-20 for Haltech)
3/8 NPT Air Temp $28
Voltmeter (read off input wire)

The clock display will be separated with a decimal point instead of a colon. Examples below

12.00 vs 12:00
1.45 vs 1:45
2.11 vs 2:11

The price of these gauges will be $199 + $15 shipping (to continental US) and however many sensors you want to monitor.

To buy the gauge go to http://www.mr2oc.com/showthread.php?t=514978